Description:

100% New And High Quality Diamond Tester

Package includes:

1PC X Diamond Tester
1PC X User manual
1PC X Protected leather bag

specification:

Item type: Diamond Tester
Material: Metal, Plastic
Color: Black (shown as the pictures)
Size: (As picture shows)
13.5 x 4 x 2cm/5.31*1.57*0.79inch
Powered by DC 9V battery x 1 ( Not included )
Features:
Easy to use even for a new beginner
Emit audible sounds to give accurate reading
Diamond indicator will be showed if the stone is a REAL diamond (Green light)
Metal alert (continuous buzzing sound when user accidentally touches metal rather than stone )
Large / Small switch for testing diamonds +/ – 8 points
To emit sounds to give accurate reading
LCD display & LED indicator
If a stone is Fake crystal, a simulant such as cubic zirconium ( CZ ), will be no reaction

Operating methods:

1. Open the power, the power indicator light, instrument began preheating, after a few seconds instrument can be used.
2. Take the naked drill to be tested into support tray appropriate sunken hole, and its mesa upwards. Those already inlay need not put tray hole in, you can use hand to hold it.
3. According to the weight of the tested diamonds and measuring the temperature place to move several bright leds.
4. Take down needle sheath, handhold instruments, the right index finger touch the conductive plate on the back cover of instrument. To make the probe vertically and gently contact with mesa of measured diamond.
5. Carefully watching the instrument, if the rest of the emitting diode light reflect yellow, when light place moves to nine diodes with accompany beeping, this explains those tested are for real diamonds. On the contrary, if light place moves to insufficient nine diodes, and without accompany beeping, this explains fake diamond or counterfeit.

Tester 4

Test scope:
1. Diamond
2. Moissanite
3.It can distinguish diamond from Moissanite

Package includes:

1PC X Diamond Tester
1PC X User manual
1PC X Protected leather bag
1PC X Power line

Powered by DC 9V battery x 1 ( Not included )

Usage:
1. Install the battery or power cord (cannot be used simultaneously)
2. Wait for the preparation light to light up
3. The probe of the tester should be in vertical contact with the gemstone being tested, and the hand should contact the metal conductive plate on the back of the introducer
4. After the test is completed, the diamond lamp lights up, indicating that the tested object is diamond, and the Moissanite lamp lights up, indicating that the tested object is Moissanite

0.001g precision / 50g -pocket scale

1. Material: ABS + Stainless weighing pan

2. Capacity: 50g

3. Readability: 0.001g / 0.001oz / 0.0001ozt / 0.001dwt / 0.02gn / 0.005ct

4. Units: g / oz / ozt / dwt / gn / ct

5. Tare Range: Tare full capacity

6. Auto Off: 180 seconds off

7. Operation Temp: 10-30℃

8. Power: 2 x AAA batteries (Not Including)

9. Size: 14*8.4*2.3 cm