Application Guidelines :

✔ 50% strength of bond in 20 minutes, 90% strength of bond in 24 hours, and 100% strength of bond after 72 hours.

Note:

Clean the work surface, make sure it’s smooth and clean. Please stick and let sit for 24 hours, the longer the more viscous.

Description:

Quality :original 3M prodcut.

Color : Clear Thickness :1mm

Length: 2.5m Width:6/10/15/20/30/40/50mm

Fast and easy-to-use permanent bonding method provides high strength and long-term durability

Virtually invisible fastening keeps surfaces smooth

Can replace mechanical fasteners (rivets, welding, screws) or liquid adhesives

Package Included :

1 x 3m Double Sided tape

How to use this tape?

Clean: For maximum bond strength,the surface must be clean, dry, smooth, have no rust and oil pollution.Typical cleaning solvents are heptane or isopropyl alcohol.

Pressure: Pressure on the adhesive and the surface can help improve bond strength, roller or platen can be used.

Time: After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hoursand 100% after 72 hours.

Temperature:Ideal application temperature range is 70°F to 100°F (21degree centigrade to 38degree centigrade).Operating temperature should not be below 10 degree centigrade, the temperature is too low, will lead to cure time longer. If temperature is too low, move material and adhesive tape into the warm indoor storage or heating treatment.

What percent of the final bond strength can I expect immediately after application? After 24 hours? After 72 hours?

A. Immediately after an application is made, about 60% of the bond strength is achieved. As the adhesive continues to wet-out the surface, you can expect the bond to be at about 75% – 80% after 24 hours. After 72 hours, 95%+ of the bond strength is achieved. The bond will continue to build with time.